LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical System >> V-Belt (FA20) >> On-Vehicle Inspection

On-Vehicle Inspection

  1. V-belt check
    NOTE: Check the belt when reusing it.
    G08554084Courtesy of SUBARU OF AMERICA, INC.
    1. Check the V-belt for wear or cracks.
      NOTE:
      • Replace the belt if it is cracked.
      • Replace the belt if it is worn until its core is exposed.
      • Replace the belt if its rib rubber is chipped.
      G08554085Courtesy of SUBARU OF AMERICA, INC.
    2. Check that the V-belt fits securely in the rib grooves.
      NOTE:
      • Visually and manually check that the V-belt is properly located on the rib grooves at the lower side of the pulleys.
      • If the V-belt is not located properly, replace with a new part.
  2. V-ribbed belt tensioner ASSY check
    1. Stop the engine from idling speed and check that the V-belt does not protrude from the width of belt tensioner pulley.
    2. Move the belt tensioner in the both rotational directions to check whether it is caught.
    NOTE: Replace the V-ribbed belt tensioner ASSY if faulty.
scientia non olet · About LEMON Manuals