LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Intake System / Exhaust System >> Exhaust Manifold (FA20) >> Removal

Exhaust Manifold (FA20): Removal

  1. Disconnection of the battery ground terminal (Refer to WORKING PRECAUTIONS AND NOTES )
  2. Disconnect the connector for air/fuel ratio sensor and the 2 clamps. (Refer to AIR/FUEL RATIO SENSOR (FA20) )
  3. Disconnect the connector for oxygen sensor and the 2 clamps. (Refer to REMOVAL )
  4. Removal of exhaust pipe ASSY FR (Refer to INSTALLATION )
    G12587034Courtesy of SUBARU OF AMERICA, INC.
  5. Exhaust manifold removal
    1. Remove the two nuts and remove the exhaust pipe SUB-ASSY FR.
    2. Remove the gasket.
      G12587035Courtesy of SUBARU OF AMERICA, INC.
    3. Remove the six nuts and remove the exhaust manifold.
    4. Remove the two gaskets.
scientia non olet · About LEMON Manuals