LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis >> Electrical >> Gauges >> Meter / Gauge System >> Meter & Gauge System >> Checking/Clearing Diagnostic Codes

Checking/Clearing Diagnostic Codes

  1. Checking diagnostic code by SSM4
    1. Using SSM4, select [Each System] →[Combination Meter] →[DTC] according to the screen instructions and check diagnostic code.
  2. Clearing recorded diagnostic codes by SSM4
    1. Using SSM4, select [Each System] →[Combination Meter] →[Clear Memory] according to the screen display and clear diagnostic code.
scientia non olet · About LEMON Manuals