LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis >> Drivelines & Axles >> Driveshaft & Universal Joints >> Propeller Shaft >> Propeller Shaft ASSY >> Removal

Propeller Shaft ASSY: Removal

  1. Draining of manual transmission oil (Transmission M/T) (Refer to MANUAL TRANSMISSION OIL )
  2. Draining of automatic transmission fluid (Transmission A/T) (Refer to AUTOMATIC TRANSMISSION FLUID )
  3. Removal of exhaust pipe ASSY CTR (Refer to REMOVAL )
  4. Removal of propeller shaft W/center bearing ASSY
    1. Place alignment marks on the differential side companion flange and flexible coupling.
      G12588332Courtesy of SUBARU OF AMERICA, INC.
    2. Remove 4 bolts, 4 washers and 4 nuts.
      G12588333Courtesy of SUBARU OF AMERICA, INC.
    3. Remove the 2 bolts.
      G12588334Courtesy of SUBARU OF AMERICA, INC.
    4. Remove the propeller shaft W/center bearing ASSY from the extension housing, and insert the SST into the extension housing to prevent oil leakage. (Transmission M/T)

      SST 09325-20010 

      CAUTION:
      • Do not apply excessive force to the parts such as the universal joint during removal.
      • Do not damage the oil seal.
      G12588335Courtesy of SUBARU OF AMERICA, INC.
    5. Remove the propeller shaft ASSY from the extension housing, insert the SST into the extension housing to prevent oil leakage. (Transmission A/T)

      SST 09325-40010

      CAUTION:
      • Do not apply excessive force to the parts such as the universal joint during removal.
      • Do not damage the oil seal.