Power Window Regulator Switch ASSY (Installed To The Front Side): Installation

Installation of power window regulator switch ASSY

Engage the 4 claws and install the power window regulator switch ASSY to the front armrest base panel UPR RH.

Courtesy of SUBARU OF AMERICA, INC.

Installation of power window regulator switch ASSY W/front armrest base panel UPR RH (Refer to ASSEMBLY )
Installation of front door trim board SUB-ASSY RH
Install the part in the same manner as LH side. (Refer to ASSEMBLY )
Installation of door armrest cover RH
Install the part in the same manner as LH side. (Refer to ASSEMBLY )
Connection of the battery ground terminal
Standard value: T=6.0N.m {61kgf.cm} {4.4ft.lbf}
Settings when removing/installing battery terminals (Refer to SETTING PROCEDURES AT PARTS REPLACEMENT AND REMOVAL/INSTALLATION )