Unit Inspection
NOTE:
The following procedure is for LH side. Perform the same procedures for the RH side.
- Inspection of the front door courtesy light switch ASSY
- Measure the resistance when the shaft of the front door courtesy light switch ASSY is operated.
Resistance
| Inspection terminals |
Inspection conditions |
Standard value |
| 1 - Chassis ground |
When the shaft is not pushed in |
Less than 1 Ω |
| 1 - Chassis ground |
When the shaft is pushed in |
10 kΩ or more |
 Courtesy of SUBARU OF AMERICA, INC.
|