Inspection steps

Reading of SSM4 data

Using the SSM4, follow the screen display to bring up and check the [Data monitor].

SSM4 screen: [Each System] →[Combination Meter] →[Data monitor]

Item name [Symbol]	Description/display range	Normal value	Remarks
[Multi Display Switch (Up)]	Multi SW state (up) Display range: OFF to ON	ON: When the switch is pressed OFF: When the switch is released	If it is abnormal, the steering switch or wiring harness may be faulty
[Multi Display Switch (Down)]	Multi SW state (down) Display range: OFF to ON
[Multi Display Switch (Left)]	Multi SW state (left) Display range: OFF to ON
[Multi Display Switch (Right)]	Multi SW state (right) Display range: OFF to ON
[Multi Display Switch (Enter)]	Multi SW state (ENTER) Display range: OFF to ON
[Multi Display Switch (Back)]	Multi SW state (BACK) Display range: OFF to ON

Criteria: The normal value is displayed properly.

NG: Replacement of steering pad switch (Refer to STEERING PAD SWITCH )

OK: Go to next step

Replacement of the combination meter ASSY (Refer to REMOVAL )