LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Interior Trim / Instrument Panel >> Instrument Panel UPR >> Assembly

Instrument Panel UPR: Assembly

  1. Installation of instrument panel cushion
    1. Install a new instrument panel cushion.
      G12594773Courtesy of SUBARU OF AMERICA, INC.
  2. Installation of defroster nozzle garnish NO. 1
    1. Engage the 16 claws and 8 guides and install defroster nozzle garnish NO. 1.
      G12594774Courtesy of SUBARU OF AMERICA, INC.
  3. Installation of instrument panel resistor bezel (installed on the RH side)
    1. Engage the 3 claws and install the instrument panel resistor bezel.
      G12594775Courtesy of SUBARU OF AMERICA, INC.
  4. Installation of instrument panel resistor SUB-ASSY NO. 1
    1. Engage the 3 claws and install instrument panel resistor SUB-ASSY NO. 1.
      G08555471Courtesy of SUBARU OF AMERICA, INC.
  5. Installation of instrument panel resistor bezel (installed on the LH side)
    NOTE: Install the part in the same manner as RH side.
  6. Installation of instrument panel resistor SUB-ASSY NO. 2
    NOTE: Install the part in the same manner as RH side.
  7. Installation of instrument panel resistor ASSY CTR
    1. Engage the 2 clips and install the instrument panel resistor ASSY CTR
    2. Install the 2 screws.
      G12594777Courtesy of SUBARU OF AMERICA, INC.
  8. Installation of defroster nozzle garnish NO. 2
    1. Engage the 2 claws and install defroster nozzle garnish NO. 2.
      G12594778Courtesy of SUBARU OF AMERICA, INC.
  9. Installation of defroster nozzle garnish NO. 3
    NOTE: Install the part in the same manner as RH side.
  10. Installation of side defroster nozzle duct NO. 1
    1. Engage the 2 claws and install side defroster nozzle duct NO. 1.
      G12594779Courtesy of SUBARU OF AMERICA, INC.
  11. Installation of side defroster nozzle duct NO. 2
    NOTE: Install the part in the same manner as RH side.
  12. Installation of defroster nozzle ASSY
    1. Fit in the 5 claws.
    2. With the 5 screws, install the defroster nozzle ASSY as an assembly with side defroster nozzle ducts NO. 1 and NO. 2.
      G12594780Courtesy of SUBARU OF AMERICA, INC.
  13. Installation of heater-to-resistor duct NO. 2
    1. Engage the claw and install heater-to-resistor duct NO. 2.
    2. Install the 3 screws.
      G12594781Courtesy of SUBARU OF AMERICA, INC.
  14. Installation of heater-to-resistor duct NO. 1
    NOTE: Install the part in the same manner as RH side.
scientia non olet · About LEMON Manuals