LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting System (Exterior) >> Stop Light Switch >> Unit Inspection

Unit Inspection

  1. Inspection of the stop light switch ASSY
    1. Resistance check
      1. Measure the resistance according to the following chart.
        STANDARD VALUE SPECIFICATION - RESISTANCE

        Inspection terminals Inspection conditions Standard value
        1 - 2 When the shaft is not pushed in Less than 1 Ω
        When the shaft is pushed in 10 kΩ or more
        G12595323Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals