LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis (Single Page) >> Restraints >> Air Bag, SRS >> Air Bag System (Diagnostics) >> SRS Airbag System >> Airbag Connector

Airbag Connector

  1. How to disconnect the power supply
    CAUTION: When pulling the slide lock or disconnecting connector, be sure to hold the connector, not the harness.
    1. Push the lock (A).
    2. While holding down the lock (A), disconnect the connector.
    G08553177Courtesy of SUBARU OF AMERICA, INC.
  2. How to connect the power supply
    CAUTION: Be sure to insert the connector in until it is locked. Then pull it gently to make sure that it is locked.
    1. Holding the connector, push it in securely until a clicking sound is heard.
      G08553178Courtesy of SUBARU OF AMERICA, INC.
  3. How to disconnect the airbag control module
    1. Push the lock lever plate (A).
    2. While holding down the lock lever plate (A), pull the lever toward you.
      G08553179Courtesy of SUBARU OF AMERICA, INC.
  4. How to connect the airbag control module
    CAUTION: Be sure to insert the connector in until it is locked. Then pull it gently to make sure that it is locked.
    1. Insert the connector and push the lock lever in securely.
  5. How to disconnect the driver's airbag module (roll connector)
    CAUTION: When pulling the slide lock or disconnecting connector, be sure to hold the connector, not the harness.
    1. Pull the slide lock (A) in the direction of arrow.
    2. With the slide lock pulled, disconnect the connector.
      G08553180Courtesy of SUBARU OF AMERICA, INC.
  6. How to connect the driver's airbag module (roll connector)
    CAUTION: Be sure to insert the connector in until it is locked. Then pull it gently to make sure that it is locked.
    1. Holding the connector, push it in securely until a clicking sound is heard.
      G08553181Courtesy of SUBARU OF AMERICA, INC.
  7. How to disconnect the passenger's airbag module
    CAUTION: When pulling the slide lock or disconnecting connector, be sure to hold the connector, not the harness.
    1. Pull the slide lock (A) in the direction of arrow.
    2. With the slide lock pulled, disconnect the connector.
      G08553182Courtesy of SUBARU OF AMERICA, INC.
  8. How to connect the passenger's airbag module
    CAUTION: Be sure to insert the connector in until it is locked. Then pull it gently to make sure that it is locked.
    1. Holding the connector, push it in securely until a clicking sound is heard.
      G08553183Courtesy of SUBARU OF AMERICA, INC.
  9. How to disconnect the driver's airbag module, the curtain airbag module and the pretensioner
    1. Using a flat tip screwdriver, pry the push lock upward to unlock.
    2. Pull the connector to disconnect from the airbag module ASSY or the retractor ASSY.
      G08553184Courtesy of SUBARU OF AMERICA, INC.
  10. How to connect the driver's airbag module, the curtain airbag module and the pretensioner
    CAUTION:
    • Be sure to insert the connector in until it is locked.
    • Press in the push lock securely. Then pull it gently to make sure that it is locked.
    1. Connect the connector in the reverse order of disconnecting. At this time, be sure to insert until a clicking sound is heard.
      G08553185Courtesy of SUBARU OF AMERICA, INC.
  11. How to disconnect the front sub sensor
    CAUTION: When pulling the slide lock or disconnecting connector, be sure to hold the connector, not the harness.
    1. Push the lock arm.
    2. Holding outer part, pull it one step in the direction of arrow.
      G08553186Courtesy of SUBARU OF AMERICA, INC.
    3. Push the lock arm again.
    4. Holding outer part, pull it in the direction of arrow to disconnect the connector.
      G08553187Courtesy of SUBARU OF AMERICA, INC.
  12. How to connect the front sub sensor
    CAUTION: Be sure to insert the connector in until it is locked. Then pull it gently to make sure that it is locked.
    1. Connect the connector in the reverse order of disconnecting. At this time, be sure to insert until a clicking sound is heard.
      G08553188Courtesy of SUBARU OF AMERICA, INC.
  13. How to disconnect the front door impact sensor and the satellite safing sensor
    CAUTION: When pulling the slide lock or disconnecting connector, be sure to hold the connector, not the harness.
    1. Holding outer part (A), pull it in the direction of arrow.
      G08553189Courtesy of SUBARU OF AMERICA, INC.
  14. How to connect the front door impact sensor and the satellite safing sensor
    CAUTION:
    • Outer side (A) moves back, and so do not touch the outer part.
    • Be sure to insert the connector in until it is locked. Then pull it gently to make sure that it is locked.
    1. Holding the connector, push it in securely until a clicking sound is heard.
      G08553190Courtesy of SUBARU OF AMERICA, INC.
  15. How to disconnect the side airbag sensor and the curtain airbag sensor
    CAUTION: When pulling the slide lock or disconnecting connector, be sure to hold the connector, not the harness.
    1. Push the lock arm.
    2. Holding outer part, pull it one step in the direction of arrow.
      G08553191Courtesy of SUBARU OF AMERICA, INC.
    3. Push the lock arm again.
    4. Holding outer part, pull it in the direction of arrow to disconnect the connector.
      G08553192Courtesy of SUBARU OF AMERICA, INC.
  16. How to connect the side airbag sensor and the curtain airbag sensor
    CAUTION: Be sure to insert the connector in until it is locked. Then pull it gently to make sure that it is locked.
    1. Holding the connector, push it in securely until a clicking sound is heard.
      G08553193Courtesy of SUBARU OF AMERICA, INC.
  17. How to disconnect the side airbag module
    CAUTION: When pulling the slide lock or disconnecting connector, be sure to hold the connector, not the harness.
    1. Push the lock arm.
    2. Holding outer part, pull it one step in the direction of arrow.
      G08553194Courtesy of SUBARU OF AMERICA, INC.
    3. Push the lock arm again.
    4. Holding outer part, pull it in the direction of arrow to disconnect the connector.
      G08553195Courtesy of SUBARU OF AMERICA, INC.
  18. How to connect the side airbag module
    CAUTION: Be sure to insert the connector in until it is locked. Then pull it gently to make sure that it is locked.
    1. Connect the connector in the reverse order of disconnecting. At this time, be sure to insert until a clicking sound is heard.
      G08553196Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals