LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Brake System (Hydraulic) >> Brake Pedal (AT Model) >> Removal

Brake Pedal (AT Model): Removal

  1. Removal of instrument side panel LH (Refer to REMOVAL , Step 14 )
  2. Removal of instrument panel under cover SUB-ASSY No. 1 (Refer to LIGHT CONTROL RHEOSTAT )
  3. Removal of stop light switch ASSY (Refer to REMOVAL )
  4. Removal of stop light switch mounting adjuster
    1. Release 2 claws and remove the stop light switch mounting adjuster.
    G08557009Courtesy of SUBARU OF AMERICA, INC.
  5. Removal of push rod pin
    1. Remove the clips and the push rod pin.
    G08557010Courtesy of SUBARU OF AMERICA, INC.
  6. Removal of brake pedal support ASSY.
    1. Remove 2 bolts.
      G08557011Courtesy of SUBARU OF AMERICA, INC.
    2. Remove 4 nuts and then the brake pedal support ASSY.
      G12591036Courtesy of SUBARU OF AMERICA, INC.