LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Brake System (Hydraulic) >> Brake Pedal (AT Model) >> Disassembly

Brake Pedal (AT Model): Disassembly

  1. Removal of brake pedal stopper.
    1. Remove the brake pedal stopper from the brake pedal.
  2. Removal of brake pedal
    1. Remove the bolt and nut from the brake pedal support ASSY.
      NOTE: Hold the bolt and rotate the nut.
    2. Remove the brake pedal return spring.
    3. Remove the brake pedal shaft collar.
    4. Remove 2 brake pedal shaft bushings.
      G12591037Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals