Seat Backrest Heater: Inspection
- INSPECT FRONT SEAT BACK HEATER ASSEMBLY LH
- Measure the resistance according to the value(s) in the table below.
TESTER CONNECTION AND SPECIFIED CONDITION - STANDARD RESISTANCETester connection Condition Specified Condition 1 - 2 Always 3.26 to 4 Ω If the result is not as specified, replace the separate type front seatback pad LH.
- INSPECT FRONT SEAT BACK HEATER ASSEMBLY RH
- Measure the resistance according to the value(s) in the table below.
TESTER CONNECTION AND SPECIFIED CONDITION - STANDARD RESISTANCETester connection Condition Specified Condition 1 - 2 Always 3.26 to 4 Ω If the result is not as specified, replace the separate type front seatback pad RH.