Rear Seat ASSY: Installation

Installation of the rear seat backrest lock striker SUB-ASSY LH
1. Install the rear seat backrest lock striker SUB-ASSY LH with 2 bolts.
Installation of the rear seat backrest lock striker SUB-ASSY RH
NOTE: Install the part in the same manner as LH side.
Installation of the rear seat backrest lock striker cover LH
1. Engage 3 clips and install the rear seat backrest lock striker cover LH.
Installation of the rear seat backrest lock striker cover RH
NOTE: Install the part in the same manner as LH side.
Installation of package tray trim panel ASSY (Refer to INSTALLATION , Step 2)
Installation of the rear window side garnish LH (Refer to INSTALLATION , Step 11)
Installation of rear window side garnish RH
NOTE: Install the part in the same manner as RH side.
Installation of the quarter trim lid LH (Refer to INSTALLATION , Step 13)
Installation of quarter trim lid RH
NOTE: Install the part in the same manner as LH side.
Installation of quarter lower trim LH
1. Engage the 7 clips and install the quarter lower trim LH.
2. Install the 3 clips.
Installation of quarter lower trim RH
NOTE: Install the part in the same manner as LH side.
Installation of the trunk trim cover INN LH (Refer to INSTALLATION , Step 17)
Installation of the trunk trim cover INN RH
NOTE: Install the part in the same manner as LH side.
Installation of front door scuff plate LH (Refer to INSTALLATION , Step 25)
Installation of front door scuff plate RH
NOTE: Install the part in the same manner as LH side.
Installation of front door opening trim weather strip LH
Installation of front door opening trim weather strip RH
Installation of the bench type rear seat backrest ASSY
1. Carry in the bench type rear seat backrest ASSY to the vehicle.
  CAUTION: Be careful not to damage the seat, the body exterior and interior.
2. Install the bench type rear seat backrest ASSY with 2 bolts.
  Standard value: T=33N.m {337kgf.cm} {24.3ft.lbf}
3. Install the rear seat backrest cover with 3 clips.
Installation of the center console silencer No. 1
1. Install the center console silencer No. 1 with 2 clips.
Installation of the separate type rear seat cushion ASSY
1. Carry in the rear seat ASSY LH to the vehicle.
  CAUTION: Be careful not to damage the seat, the body exterior and interior.
2. Engage the hook and temporally install the rear seat cushion ASSY LH.
3. Install the rear seat cushion ASSY LH with the bolt.
  Standard value: T=13N.m {133kgf.cm} {9.6ft.lbf}
  
  CAUTION: When installing the rear seat cushion ASSY, install it so that the rear seat belt ASSY inner does not face downward.
Installation of the separate type rear seat cushion ASSY RH
NOTE: Install the part in the same manner as LH side.