LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> Ascent Limited >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Radiator Fan and Fan Motor Assembly >> Removal

Radiator Fan and Fan Motor Assembly: Removal

  1. Disconnect the ground cable from battery. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Drain engine coolant. Ref. to COOLING (H4DOTC)>ENGINE COOLANT>REPLACEMENT .
  3. Remove the reservoir tank. Ref. to COOLING (H4DOTC)>RESERVOIR TANK>REMOVAL .
  4. Remove the air intake duct. Ref. to INTAKE (INDUCTION) (H4DOTC)>AIR INTAKE DUCT>REMOVAL .
  5. Disconnect the radiator inlet hose.
    G13199122Courtesy of SUBARU OF AMERICA, INC.
  6. Disengage the claws and remove the radiator fan and fan motor assembly.
    G13199123Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals