LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> Ascent Limited >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting System >> Hazard Switch >> Removal

Hazard Switch: Removal

  1. Disconnect the ground cable from battery. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the grille ventilation assembly center. Ref. to AIR CONDITIONER>AIR VENT GRILLE>REMOVAL>CENTER GRILLE ASSEMBLY .
  3. Remove the switch assembly hazard.
    1. Release the clips and claws.
    2. Disconnect the connector and remove the switch assembly hazard.
    G13200812Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals