LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> WRX Limited, Standard Trans >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrumentation System & Driver Information Center (Service Information) >> Switches And Harness >> Removal >> Multi-Function Display Switch

Multi-Function Display Switch

  1. Disconnect the ground cable from battery. Ref. to NOTE>NOTE>BATTERY
    NOTE: For model with battery sensor, disconnect the ground terminal from battery sensor.
  2. Remove the center grille assembly. Ref. to HVAC SYSTEM (HEATER, VENTILATOR AND A/C)>Air Vent Grille>REMOVAL>CENTER GRILLE ASSEMBLY
  3. Release the claws and remove the Switch - Multi-Function Display.
    G10298804
scientia non olet · About LEMON Manuals