Combination Meter: Installation
CAUTION:
- Make sure the electrical connector is connected securely.
- Make sure that each meter operates normally.
- When the combination meter assembly has been replaced, be sure to perform the following operations.
- For models without the keyless access with push button start, except for C0, be sure to perform the Registration Of Immobilizer System. For detailed operation procedure, refer to "Type B" described in "REGISTRATION SERVICE INFORMATION FOR IMMOBILIZER".IMMOBILIZER SYSTEM (DIAGNOSTICS)
- Be sure to reset the ODO fuel economy value of the Multi-Function Display (MFD). Ref. to INSTRUMENTATION/DRIVER INFO>Multi-Function Display (MFD) System>OPERATION>ODO FUEL ECONOMY VALUE RESET
- Install the combination meter assembly.
- Install the visor - combination meter.
- Connect the battery ground terminal. Ref. to NOTE>NOTE>BATTERY