Meter pointer operation check

In meter pointer operation check, the meter operation, warning/indicator light, illumination and TFT are checked.

After a buzzer sounds for 0.5 seconds and "STEP1" is displayed on TFT, the meter pointer operation check mode is initiated.

Time
(sec)

Meter indicator

TFT display, illumination

Warning/indicator light

MIN indication
↓
MAX indication

ILL1 (Min. brightness)
↓⁽³⁾
ILL6 (Max. brightness)

⁽¹⁾, ⁽²⁾

MAX indication
↓
MIN indication

ILL6 (Max. brightness)
↓⁽³⁾
ILL1 (Min. brightness)

⁽¹⁾	Warning lights and indicator lights controlled by the meter drive circuit are illuminated. Ref. to INSTRUMENTATION/DRIVER INFO>General Description>SPECIFICATION .

⁽²⁾	Warning lights and indicator lights controlled by other module are turned on/off according to the module control. Ref. to INSTRUMENTATION/DRIVER INFO>General Description>SPECIFICATION .

⁽³⁾	Displays each level for one second.