LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> Outback 2.5i Limited >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> LAN Communication System (Diagnostics) >> General Description >> Inspection >> Inspection Without Using Can Diagnostic

Inspection Without Using Can Diagnostic

  1. CHECK BATTERY.

    Check the battery. Ref. to STARTING/CHARGING SYSTEMS(H4DO)>Battery>INSPECTION . Ref. to STARTING/CHARGING SYSTEMS(H6DO)>Battery>INSPECTION .

    Is the check result OK?

    Yes: Go to  2.

    No: Charge or replace the battery.

  2. CHECK FUSE.

    Check the fuse which might affect the problem.

    Is the check result OK?

    Yes: Go to  3.

    No: Replace the fuse. If the replaced fuse blows out easily, some type of fault is present. Therefore, repair the faulty portion.

  3. CHECK HARNESS.

    Check the harness and harness connector connection which might affect the problem.

    Is the check result OK?

    Yes: In the Basic Diagnostic Procedure, Go to Step 3.

    No: Repair or replace the faulty harness or harness connector.

scientia non olet · About LEMON Manuals