LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> Outback 2.5i Limited >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> LAN Communication System (Diagnostics) >> General Description >> Inspection >> Inspection Using Can Diagnostic

Inspection Using Can Diagnostic

  1. CHECK BODY INTEGRATED UNIT REGISTRATION STATUS.

    Check that settings of body integrated unit correspond to vehicle equipment. Ref. to BODY CONTROL SYSTEM (DIAGNOSTICS)>REGISTRATION BODY INTEGRATED UNIT .

    Does the vehicle equipment correspond to settings?

    Yes: Go to  2.

    No: Match the settings of the body integrated unit with the vehicle equipment.

  2. CHECK BODY INTEGRATED UNIT CUSTOMIZE SETTING.

    Check that settings of body integrated unit correspond to vehicle condition. Ref. to BODY CONTROL SYSTEM (DIAGNOSTICS)>USER CUSTOMIZING .

    Do the customize settings correspond to the vehicle condition?

    Yes: Go to  3.

    No: Match the settings of the body integrated unit with the vehicle condition.

  3. CHECK FACTORY INITIAL SETTING OF BODY INTEGRATED UNIT.

    Confirm «Factory initial setting» of body integrated unit registrations is set to «Market». Ref. to BODY CONTROL SYSTEM (DIAGNOSTICS)>REGISTRATION BODY INTEGRATED UNIT .

    Is it set to «Market»?

    Yes: In the title>Basic Diagnostic Procedure, Go to step  4.

    No: Switch from «Factory» to «Market».

scientia non olet · About LEMON Manuals