LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> WRX STI >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine Intake System (Induction) And Turbocharger (2.5L) >> Intake Duct >> Removal

Intake Duct: Removal

  1. Disconnect the ground cable from battery.
  2. Remove the intake manifold. <Ref. to REMOVAL , Intake Manifold.>
  3. Remove the sensor, engine wiring harness and fuel pipe from the intake manifold. <Ref. to DISASSEMBLY , Intake Manifold.>
  4. Remove the intake duct from intake manifold.
    Fig 1: Locating Bolt Of Intake Manifold (Intake Duct)
    G11571868Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals