LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> WRX STI >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine Intake System (Induction) And Turbocharger (2.5L) >> Chamber Assembly >> Removal >> Hose

Chamber Assembly: Removal: Hose

  1. Disconnect the hose (front).
    NOTE: Be careful not to damage the grommet.
    Fig 1: Locating Chamber Assembly Hose (Front)
    G10265182Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the cowl panel. <Ref. to REMOVAL , Cowl Panel.>
  3. Remove clip (A), and remove the hose (rear).
NOTE: Be careful not to damage the grommet.
Fig 2: Locating Chamber Assembly Hose (Front) Clip
G10265183Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals