Chamber Assembly: Installation: Hose

Connect the hose (rear) and install clip (A).

Fig 1: Locating Clip Of Chamber Assembly Hose (Rear)
Courtesy of SUBARU OF AMERICA, INC.
Install the cowl panel. <Ref. to INSTALLATION , Cowl Panel.>
Connect the hose (front).

Fig 2: Locating Clamp Of Chamber Assembly Hose (Front)

Courtesy of SUBARU OF AMERICA, INC.

NOTE: Align the alignment mark (a) on the chamber assembly to the alignment mark (b) on the hose (front) to connect.

Fig 3: Locating Alignment Marks On Chamber Assembly And Hose (Front)

Courtesy of SUBARU OF AMERICA, INC.