Combination Meter: Disassembly

CAUTION:

Use gloves to avoid damage and getting fingerprints on the glass surface and meter surfaces.
Be careful not to apply excessive force to the trip knob.
Be sure not to touch the meter indicator needle.
Because LEDs are used for all of warning lights and indicator lights, they are not removable from the meter - main assembly.

Release the claws, and then remove the glass - combination meter.

Fig 1: Glass Combination Meter Claws Location
Courtesy of SUBARU OF AMERICA, INC.
Release the claws, and then remove the visor - combination meter.

Fig 2: Combination Meter Visor Claws Location

Courtesy of SUBARU OF AMERICA, INC.