Basic Diagnostic Procedure: Procedure: MFD

Step	Check	Yes	No
1 PERFORM CUSTOMER INTERVIEW. Using the Check List for Interview, ask the customer the condition of how trouble occurs. <Ref. to CHECK , Check List for Interview.>	Did you interview the customer?	Go to step 2.	Interview the customer. <Ref. to CHECK , Check List for Interview.>
2 CHECK CAN COMMUNICATION. Read the DTC of the CAN system using the Subaru Select Monitor. <Ref. to OPERATION , Read Diagnostic Trouble Code (DTC).>	Is DTC displayed?	Perform the diagnosis for the displayed DTCs. <Ref. to LIST , List of Diagnostic Trouble Code (DTC).>	Go to step 3.
3 CHECK MFD. Read the DTC relating the MFD using the Subaru Select Monitor. <Ref. to READ DIAGNOSTIC TROUBLE CODE (DTC) .>	Is DTC displayed?	Record the DTCs and time stamps, and perform the diagnosis for the displayed DTCs. <Ref. to LIST , List of Diagnostic Trouble Code (DTC).> For time stamp, refer to "LAN SYSTEM". <Ref. to TIME STAMP , CAUTION, General Description.> Go to step 5.	Go to step 4.
4 CHECK MFD. Check the MFD display using the system operation check mode of combination meter. <Ref. to SYSTEM OPERATION CHECK MODE .>	Is the check result OK?	System is normal.	Replace the MFD. <Ref. to Multi-function Display (MFD) .>
5 PERFORM DIAGNOSIS. Perform the Clear Memory Mode. Perform the Inspection Mode. <Ref. to INSPECTION MODE .> Read the DTC relating the MFD using the Subaru Select Monitor.	Is DTC displayed?	Perform the diagnosis for the displayed DTCs.	Finish the diagnosis.