Combination Meter
| Step | Check | Yes | No |
|---|---|---|---|
| 1 PERFORM CUSTOMER INTERVIEW. Using the Check List for Interview, ask the customer the condition of how trouble occurs. <Ref. to CHECK , Check List for Interview.> |
Did you interview the customer? | Go to step 2. | Interview the customer. <Ref. to CHECK , Check List for Interview.> |
| 2 CHECK CAN COMMUNICATION. Read the DTC of the CAN system using the Subaru Select Monitor. <Ref. to OPERATION , Read Diagnostic Trouble Code (DTC).> |
Is DTC displayed? | Perform the diagnosis for the displayed DTCs. <Ref. to LIST , List of Diagnostic Trouble Code (DTC).> | Go to step 3. |
| 3 CHECK COMBINATION METER. Using the Subaru Select Monitor, read DTC of combination meter. <Ref. to READ DIAGNOSTIC TROUBLE CODE (DTC) .> |
Is DTC displayed? | Record the DTCs and time stamps, and perform the diagnosis for the displayed DTCs. <Ref. to LIST , List of Diagnostic Trouble Code (DTC).> For time stamp, refer to "LAN SYSTEM". <Ref. to TIME STAMP , CAUTION, General Description.> Go to step 5. | Go to step 4. |
| 4 CHECK COMBINATION METER. Check the operation of combination meter. <Ref. to SYSTEM OPERATION CHECK MODE .> |
Is the check result OK? | System is normal. | Replace the combination meter. <Ref. to Combination Meter .> |
5 PERFORM DIAGNOSIS.
|
Is DTC displayed? | Perform the diagnosis for the displayed DTCs. | Finish the diagnosis. |