Engine Intake System (Induction) And Turbocharger (2.0L): Turbocharger: Assembly

1. Install the exhaust stay to the turbocharger.

   Tightening torque: 

   7.15 N.m (0.7 kgf-m, 5.3 ft-lb) 

   Fig 1: Installing Exhaust Stay To Turbocharger

   Courtesy of SUBARU OF AMERICA, INC.
2. Attach the stud bolts to the turbocharger.

   Tightening torque: 

   14.7 N.m (1.5 kgf-m, 10.8 ft-lb) 

   Fig 2: Locating Turbocharger Stud Bolts

   Courtesy of SUBARU OF AMERICA, INC.
3. Install the air control hose to the turbocharger.
   Fig 3: Installing Air Control Hose To Turbocharger

   Courtesy of SUBARU OF AMERICA, INC.
4. Install the turbocharger pipe to the turbocharger.
   NOTE: Use a new gasket.

   Tightening torque: 

   31.5 N.m (3.2 kgf-m, 23.2 ft-lb) 

   Fig 4: Locating Turbocharger Pipe Bolts

   Courtesy of SUBARU OF AMERICA, INC.
5. Install the union screw pipe assembly to the turbocharger.

Tightening torque: 

T1: 6.8 N.m (0.7 kgf-m, 5.1 ft-lb) 

T2: 16 N.m (1.6 kgf-m, 11.8 ft-lb) 

Fig 5: Locating Union Screw Pipe Assembly Bolts Of Turbocharger With Torque Specifications

Courtesy of SUBARU OF AMERICA, INC.