LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> WRX Base >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine Intake System (Induction) And Turbocharger (2.0L) >> Intake Duct >> Disassembly >> Intake Duct No. 1

Intake Duct No. 1

Remove the vacuum hose, blow-by diagnosis connector harness and wastegate control solenoid valve from the intake duct.

Fig 1: Locating Vacuum Hose, Blow-By Diagnosis Connector Harness And Wastegate Control Solenoid Valve
G11266636Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals