LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> WRX Base >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine Intake System (Induction) And Turbocharger (2.0L) >> Air Cleaner Element >> Installation

Air Cleaner Element: Installation

Install in the reverse order of removal.

CAUTION: Be sure to use SUBARU genuine air cleaner element depending on the engine type when replacing the air cleaner elements. Using other air cleaner element may affect the engine performance.
NOTE:
  • Check that there is no dirt or dust within the air cleaner case. If any dirt or dust is found, clean it.
  • Install the air cleaner element as shown in the figure.
    Fig 1: Air Cleaner Element Sides Location
    G11576041Courtesy of SUBARU OF AMERICA, INC.
  • When installing the air cleaner case (rear), align the protrusion of the air cleaner case (rear) to the hole on the air cleaner case (front) to install.
Fig 2: Aligning Protrusion Of Air Cleaner Case To Hole On Air Cleaner Case
G09480050Courtesy of SUBARU OF AMERICA, INC.