LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> WRX Base >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine Intake System (Induction) And Turbocharger (2.0L) >> Air By-pass Valve >> Removal

Air By-pass Valve: Removal

  1. Remove the intake duct No. 1. <Ref. to INTAKE DUCT NO. 1 , REMOVAL, Intake Duct.>
  2. Disconnect the vacuum hose from the air by-pass valve, and remove the air by-pass valve from the intake duct No. 2.
Fig 1: Locating Air By-Pass Valve Bolt
G09480132Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals