LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Outback 2.5i >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Air Bag System (Service Information) >> Airbag Connector >> Procedure >> Passenger's Airbag Module

Passenger's Airbag Module

  1. How to disconnect:
    CAUTION: When pulling the slide lock or disconnecting connector, be sure to hold the connector, not the harness.
    1. Pull the slide lock (a) in the direction of arrow.
    2. With the slide lock pulled, disconnect the connector.
    Fig 1: Pulling Passenger Airbag Module Side Lock
    G10270440Courtesy of SUBARU OF AMERICA, INC.
  2. How to connect:
    CAUTION: Be sure to insert the connector in until it is locked. Then pull it gently to make sure that it is locked.

    Holding the connector, push it in securely until a clicking sound is heard.

scientia non olet · About LEMON Manuals