LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Outback 2.5i >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Air Bag System (Service Information) >> Airbag Connector >> Procedure >> Belt Tension Sensor

Belt Tension Sensor

  1. How to disconnect:

    Press the lock arm (a) and disconnect the connector.

    CAUTION: When pulling the slide lock or disconnecting connector, be sure to hold the connector, not the harness.
    Fig 1: Identifying Belt Tension Sensor Lock Arm
    G10276962Courtesy of SUBARU OF AMERICA, INC.
  2. How to connect:

    Holding the connector, push it in securely until a clicking sound is heard.

    CAUTION: Be sure to insert the connector in until it is locked. Then pull it gently to make sure that it is locked.
scientia non olet · About LEMON Manuals