LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Legacy 3.6R Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Engine Cooling System (H4DO)) >> General Description >> Preparation Tool >> Special Tool

Special Tool

WARNING: This page is about a different variant/trim than selected.
ILLUSTRATION TOOL NUMBER DESCRIPTION REMARKS
G05667732
 18355AA000 PULLEY WRENCH
  • Used for removing and installing water pump pulley.
  • Used with PULLEY WRENCH PIN SET (18334AA030).
G07669217
 18334AA030 PULLEY WRENCH PIN SET
  • Used for removing and installing water pump pulley.
  • Used together with PULLEY WRENCH (18355AA000).
G10262333
 18360AA040 HANGER
  • Used for removing and installing the water pipe assembly LH.
  • Used together with BOLT (18363AA050).
G10262334
 18363AA050 BOLT
  • Used for removing and installing the water pipe assembly LH.
  • Used together with HANGER (18360AA040).
G09476389
 73099SG000 SPECIAL TOOL CONDENSER Used for removing and installing the radiator.
G10289719
 - SUBARU SELECT MONITOR 4 Used for setting of each function and troubleshooting for electrical system.
NOTE: For detailed operation procedures of Subaru Select Monitor 4, refer to "Application help".
scientia non olet · About LEMON Manuals