Throttle Sensor (Method With SUBARU Select Monitor)
WARNING: This page is about a different variant/trim than selected.
- Turn the ignition switch to ON. (Engine OFF)
- Read the throttle opening angle signal and voltage of throttle sensor using Subaru Select Monitor. Ref. to DISPLAY CURRENT ENGINE DATA , OPERATION, Subaru Select Monitor.
| Throttle sensor | Throttle opening angle signal | Standard |
|---|---|---|
| Main | 0.0% | Approx. 0.6 - 1.2 V |
| 100.0% | Approx. 3.8 - 4.4 V | |
| Sub | 0.0% | Approx. 1.4 - 2.0 V |
| 100.0% | Approx. 4.0 - 4.6 V |