LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Legacy 3.6R Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Fuel Injection System (H4DO)) >> Mass Air Flow and Intake Air Temperature Sensor >> Removal

Mass Air Flow and Intake Air Temperature Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the ground terminal from battery sensor. Ref. to BATTERY
  2. Disconnect the connector (A) from the mass air flow and intake air temperature sensor, and remove the mass air flow and intake air temperature sensor.
Fig 1: Locating Mass Air Flow Temperature Sensor Connector And Bolts
G10262175Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals