LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Legacy 3.6R Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Fuel Injection System (H4DO)) >> Crankshaft Position Sensor Plate >> Removal

Crankshaft Position Sensor Plate: Removal

WARNING: This page is about a different variant/trim than selected.

The crankshaft position sensor plate is tightened together with the drive plate or flywheel; therefore, proceed to "Drive Plate" or "Flywheel" for removal procedure. Ref. to REMOVAL , Drive Plate. Ref. to REMOVAL , Flywheel.

scientia non olet · About LEMON Manuals