LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Legacy 3.6R Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Continuously Variable Transaxle (CVT) (H4DO)) >> Transfer Driven Gear >> Disassembly

Transfer Driven Gear: Disassembly

WARNING: This page is about a different variant/trim than selected.
  1. Remove the ball bearing using ST.

    ST1 498077400 BEARING REMOVER

    ST2 899864100 REMOVER

Fig 1: Removing Ball Bearing Using Bearing Remover (498077400) And Remover (899864100)
G08317926Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals