LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Legacy 3.6R Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Continuously Variable Transaxle (CVT) (H4DO)) >> Oil Pump >> Installation

Oil Pump: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the O-rings.
    NOTE:
    • Use new O-rings.
    • Apply CVTF to the O-rings.
    Fig 1: O-Rings
    G08318182Courtesy of SUBARU OF AMERICA, INC.
  2. Install the plate and the oil pump.
    NOTE: Apply CVTF to the bolt.

    Tightening torque: 

    8.5 N.m (0.9 kgf-m, 6.3 ft-lb) 

    Fig 2: Locating Oil Pump And Plate Bolts
    G10218985Courtesy of SUBARU OF AMERICA, INC.
  3. Install the oil pump chain cover. <Ref. to INSTALLATION , Oil Pump Chain.>
  4. Install the torque converter assembly. <Ref. to INSTALLATION , Torque Converter Assembly.>
  5. Install the transmission assembly. <Ref. to INSTALLATION , Automatic Transmission Assembly.>
scientia non olet · About LEMON Manuals