LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Legacy 3.6R Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Continuously Variable Transaxle (CVT) (H4DO)) >> Oil Pump Chain >> Disassembly >> Drive Sprocket

Drive Sprocket

WARNING: This page is about a different variant/trim than selected.
  1. Remove the snap ring.
    Fig 1: Drive Sprocket And Snap Ring
    G08318177Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the ball bearing using ST.

    ST1 498077600 REMOVER

    ST2 399513600 INSTALLER

Fig 2: Removing Ball Bearing Using Remover (498077600) And Installer (399513600)
G10317774Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals