LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Legacy 3.6R Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Continuously Variable Transaxle (CVT) (H4DO)) >> Front Differential Assembly >> Disassembly >> Side Retainer

Side Retainer

WARNING: This page is about a different variant/trim than selected.
NOTE: After adjusting the drive pinion backlash and tooth contact, replace the oil seal and O-ring with new parts.
  1. Remove the O-rings.
    Fig 1: Side Retainer
    G08318144Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the oil seal.
Fig 2: Removing Oil Seal
G08318145Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals