CVTF Cooler (Air Cooling): Removal

WARNING: This page is about a different variant/trim than selected.

Disconnect the ground cable from battery. <Ref. to BATTERY , NOTE, Repair Contents.>
NOTE: For model with battery sensor, disconnect the ground terminal from battery sensor.
Remove the front bumper. <Ref. to REMOVAL , Front Bumper.>
Remove the headlight assembly LH. <Ref. to REMOVAL , Headlight Assembly.>
Remove the CVTF cooler (air cool) inlet hose and the CVTF cooler (air cool) outlet hose.

Fig 1: CVTF Cooler (Air Cool) Inlet Hose And Outlet Hose
Courtesy of SUBARU OF AMERICA, INC.
Remove the CVTF cooler (air cool).

Fig 2: CVTF Cooler (Air Cool)

Courtesy of SUBARU OF AMERICA, INC.