DTC P2007: TGV Control Stuck Closed Bank 2: Notes
WARNING: This page is about a different variant/trim than selected.
DTC DETECTING CONDITION:
Immediately at fault recognition
CAUTION:
After servicing or replacing faulty parts, perform Clear Memory Mode Ref. to
OPERATION
, Clear Memory Mode, and Inspection Mode Ref. to
PROCEDURE
, Inspection Mode.
| Step | Check | Yes | No |
|---|---|---|---|
| 1 CHECK FOR ANY OTHER DTC ON DISPLAY. | Is any other DTC displayed? | Check the appropriate DTC using the "List of Diagnostic Trouble Code (DTC)". Ref. to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) | Go to step 2 |
2 CHECK TUMBLE GENERATOR VALVE LH.
|
Is there any dirt or clogging with foreign objects in the tumble generator valve? | Clean the tumble generator valve. | Replace the tumble generator valve LH. Ref. to TUMBLE GENERATOR VALVE |