DTC P2610: ECM/Pcm Engine Off Timer Performance: Notes
WARNING: This page is about a different variant/trim than selected.
DTC DETECTING CONDITION:
Detected when two consecutive driving cycles with fault occur.
CAUTION:
After servicing or replacing faulty parts, perform Clear Memory Mode Ref. to
OPERATION
, Clear Memory Mode.>, and Inspection Mode Ref. to
PROCEDURE
, Inspection Mode.>.
| Step | Check | Yes | No |
|---|---|---|---|
| 1 CHECK FOR ANY OTHER DTC ON DISPLAY. | Is any other DTC displayed? | Check DTC using "List of Diagnostic Trouble Code (DTC)". Ref. to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) .> | Replace the ECM. Ref. to
ENGINE CONTROL MODULE (ECM)
.>
NOTE:
The soaking timer IC is built into the ECM.
|