LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Legacy 3.6R Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Emission Control Systems (Aux. Emission Control Devices) (H4DO)) >> PCV Valve >> Installation

PCV Valve: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the PCV valve onto the cylinder block RH.
    NOTE: Apply liquid gasket to the bolt threads of PCV valve.

    Liquid gasket: 

    THREE BOND 1324 (Part No. 004403042) or equivalent 

    Tightening torque: 

    25 N.m (2.5 kgf-m, 18.4 ft-lb) 

  2. Connect the PCV hose to the intake manifold assembly and the PCV valve.
  3. Install the air intake boot. Ref. to INSTALLATION , Air Intake Boot.
scientia non olet · About LEMON Manuals