LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Legacy 3.6R Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Mechanical (H4DO)) >> V-belt >> Installation >> Idler Pulley

Idler Pulley

WARNING: This page is about a different variant/trim than selected.
  1. Install the idler pulley.
    NOTE: When installing the idler pulley, be careful of the idler pulley cover direction.
    Fig 1: Idler Pulley Cover And Protrusion
    G11566371Courtesy of SUBARU OF AMERICA, INC.

    Tightening torque: 

    36 N.m (3.7 kgf-m, 26.6 ft-lb) 

  2. Install the V-belts. Ref. to V-BELT , INSTALLATION, V-belt.