Special Tool

WARNING: This page is about a different variant/trim than selected.

TOOL NUMBER	DESCRIPTION	REMARKS
0920287002000	REMOVER AND REPLACER	Used for removing and installing valve spring.
498277200	STOPPER	SET Used for preventing the torque converter from falling when removing and installing the engine.
498457000	ENGINE STAND ADAPTER RH	Used for disassembling and assembling engine. Used together with ENGINE STAND (499817100) and ADAPTER (18362AA020).
498457100	ENGINE STAND ADAPTER LH	Used for disassembling and assembling engine. Used together with ENGINE STAND (499817100) and ADAPTER (18362AA020).
499765700	VALVE GUIDE REMOVER AND INSTALLER	Used for removing and installing valve guide.
499765900	VALVE GUIDE REAMER	Used for reaming valve guides.
499817100	ENGINE STAND	Used for disassembling and assembling engine. Used together with ADAPTER (18362AA020), ENGINE STAND ADAPTER RH (498457000) and LH (498457100).
18252AA000	CRANKSHAFT SOCKET	Used for rotating crankshaft.
18261AA010	VALVE OIL SEAL GUIDE	Used for press-fitting of intake valve guide stem seals and exhaust valve guide stem seals.
18270AA020	SOCKET	Used for removing and installing connecting rod.
18270KA010	SOCKET	Used for installing and removing cam sprocket.
18334AA000	PULLEY WRENCH PIN SET	Used for removing and installing the crank pulley. Used together with PULLEY WRENCH (18355AA000).
18334AA020	PULLEY WRENCH PIN SET	Used for rotating the intake cam sprocket LH. Used for removing and installing cam sprocket. Used together with PULLEY WRENCH (18355AA000). Used with the PULLEY WRENCH PIN SET (18334AA040) when removing and installing the exhaust cam sprocket.
18334AA040	PULLEY WRENCH PIN SET	Used for removing and installing exhaust cam sprocket. Used together with PULLEY WRENCH (18355AA000) and PULLEY WRENCH PIN SET (18334AA020).
18350AA000	CONNECTING ROD BUSHING REMOVER AND INSTALLER	Used for removing and installing the connecting rod bushing at connecting rod small end.
18355AA000	PULLEY WRENCH	Used for removing and installing the crank pulley. Used for rotating the intake cam sprocket LH. Used for removing and installing cam sprocket. Used together with PULLEY WRENCH PIN SET (18334AA000) or PULLEY WRENCH PIN SET (18334AA020). Used with the PULLEY WRENCH PIN SET (18334AA040) when removing and installing the exhaust cam sprocket.
18360AA040	HANGER	Used for removing and installing engine. Used for removing and installing engine mounting. Used for removing and installing chain cover. Used together with BOLT (18363AA050).
18362AA020	ADAPTER	Used for disassembling and assembling engine. Used together with STAND (499817100), ENGINE STAND ADAPTER RH (498457000) and LH (498457100). Bolt used: M10 x 50 (SUBARU genuine Part No.: 010410500)
18363AA050	BOLT	Used for removing and installing engine. Used for removing and installing engine mounting. Used for removing and installing chain cover. Used together with HANGER (18360AA040).
18471AA000	FUEL PIPE ADAPTER	Used for inspecting the fuel pressure.
18657AA030	OIL SEAL INSTALLER	Used for installing the rear oil seal of engine. Used together with OIL SEAL GUIDE (18671AA020).
18671AA020	OIL SEAL GUIDE	Used for installing the rear oil seal of engine. Used together with OIL SEAL INSTALLER (18657AA030).
41399FG020	SPECIAL TOOL B	Used for installing the front oil seal of engine.
42075AG690	FUEL HOSE	Used for inspecting the fuel pressure. NOTE: This is the SUBARU genuine part.
42099AE000	QUICK CONNECTOR RELEASE	Used for disconnecting the quick connector of the fuel delivery tube and FUEL HOSE (42075AG690). NOTE: FUEL HOSE (42075AG690) is used for checking the fuel pressure.
-	SUBARU SELECT MONITOR 4	Used for setting of each function and troubleshooting for electrical system. NOTE: For detailed operation procedures of Subaru Select Monitor 4, refer to "Application help".