LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Legacy 3.6R Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Mechanical (H4DO)) >> Crank Sprocket >> Removal

Crank Sprocket: Removal

WARNING: This page is about a different variant/trim than selected.
NOTE: When replacing a single part, perform the work with the engine assembly installed to body.
  1. Remove the chain cover. Ref. to REMOVAL , Chain Cover.
  2. Remove the timing chain. Ref. to REMOVAL , Timing Chain Assembly.
  3. Remove the crank sprocket.
Fig 1: Locating Crank Sprocket
G08316982Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals