Driver's Airbag Module, Curtain Airbag Module And PRETENSIONER

How to disconnect:
1. Using a flat tip screwdriver, pry the push lock upward to unlock.
2. Pull the connector to disconnect from the airbag module assembly or the retractor assembly.
Fig 1: Disconnecting Connector From Airbag Module Assembly
Courtesy of SUBARU OF AMERICA, INC.
How to connect:
CAUTION:
- Be sure to insert the connector in until it is locked.
- Press in the push lock securely. Then pull it gently to make sure that it is locked.
Fig 2: Pressing Push Lock
Courtesy of SUBARU OF AMERICA, INC.

Connect the connector in the reverse order of disconnecting. At this time, be sure to insert until a clicking sound is heard.