LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Legacy 2.5i Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Engine Control System (Diagnostics - Introduction) (H6DO)) >> Malfunction Indicator Light >> Malfunction Indicator Light Does Not Come On

Malfunction Indicator Light Does Not Come On

WARNING: This page is about a different variant/trim than selected.

TROUBLE SYMPTOM: 

When the ignition switch is turned to ON (engine OFF), malfunction indicator light does not illuminate.

Step Check Yes No
1 CHECK DTC.  Is DTC of LAN system displayed? Ref. to OPERATION , Read Diagnostic Trouble Code (DTC). Check the appropriate DTC using the "List of Diagnostic Trouble Code (DTC)". Ref. to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) Replace the meter case assembly of combination meter. Ref. to COMBINATION METER